If your company depends on electric forklifts, the type of battery you choose will have a major impact on your operations.
What many don’t take into consideration, however, is how the weight of your forklift battery plays a significant role in the overall costs of your operations.
Below, we’ll explore how the weight of your batteries directly impacts other areas of forklift operation that should be addressed, from where batteries are stored to equipment needs.
One of the most frequent questions we receive from customers is: how much does a forklift weigh? It’s a valid question to take into consideration when you’re wanting to ship a forklift, and when you want to make sure that the forklift you purchase isn’t too heavy for the structure that it will be used on. The average forklift weighs about the same as a female African elephant. Unless you happen to have an elephant willing to jump on scales, this doesn’t help much. If you’re looking for specifics, here are some ways to find out how much the particular forklift you are interested in weighs.
The average automobile weighs approximately 3,000 lbs and the average forklift weighs close to 9,000 lbs.
Also, forklifts are heavier in the rear to counter the weight of items being carried in the forks.
forklift battery weight electric forklift batteries weigh a ton, sometimes literally. They can range anywhere from 1,000 pounds to 4,000 pounds, depending on the type of forklift. And, there are many factors that determine each battery’s final weight.
36 Volt: Used in electric forklifts, end riders/center riders, and narrow aisle forklifts
48 Volt: Used in electric forklifts
80 Volt: Used in electric forklifts
In most cases, higher voltages and capacities translate to a heavier battery. However, depending on other circumstances, such as the actual width and height of the battery, the heaviest 24-volt battery may weigh more than the lightest 36-volt battery.
A battery’s composition plays a significant part in how much it weighs. While electric forklifts are powered by either lead-acid or lithium-ion batteries, the technology behind each type differs greatly, affecting not only the battery weight but the overall efficiency of the forklift.
Lead-acid batteries are the more traditional choice for powering forklifts. This type of battery is filled with liquid and comes with a removable top so the water level can be maintained. Lead-acid batteries generate electricity through a chemical reaction of lead plates and sulfuric acid.
Lithium-ion batteries, on the other hand, are a newer technology and can feature many different chemistries. One of the most popular for the material handling industry is Lithium Iron Phosphate (LFP). This type of battery chemistry allows a battery pack to be more compact and energy-dense than lead-acid, and the cells are sealed shut, so no water maintenance is required.
They also typically weigh less than a standard lead-acid battery, which can be by as much as 40% to 60%.
Lithium itself is a light metal. Lithium-ion batteries also have a much higher energy density, allowing them to be smaller in size and weigh less.
Manufacturer Tag
Most forklifts come with a manufacturer’s tag attached that gives you its service weight. You need to be careful that you look at the service weight rather than the lift capacity. The lift capacity refers to how much weight the forklift can safely manage. The service weight refers to the actual weight of the vehicle and all its attachments. This information can also be found in the service manual that comes with the forklift.
Estimated Weight
Sometimes you need a quick guesstimate of the forklift’s weight but don’t have access to official information. In this case, all you need to know is the lift capacity of the forklift in question. Take that number and multiply it by 1.5 and again by 2. The forklift’s weight will most likely fall somewhere between the two numbers. Let’s look at an example. You know your forklift can safely lift 3000 pounds. First, multiply 3000 by 1.5 and you get 4500 pounds. Next, multiply the 3000 pounds by 2 and you get 6000 pounds. This particular forklift will weigh between 4500 and 6000 pounds.
The main reason a forklift is so heavy is that they include the counterweight. This is necessary to keep the forklift from tipping over when it’s in use. Hopefully, now you have a better idea of what determines how much a forklift weighs so that you will be able to work safely in the environment for which it is intended.
forklift battery weightAnother component that affects your operation involves considering whether you have the storage available to support the weight of the battery, especially if you have a large number of forklifts.
Lead-acid batteries have average run times of about 5.4 hours, and then must be charged for about 8 hours and go through a cooling down period of 8 hours. This is typically done by removing the batteries, placing them on a shelf, and connecting them to a forklift battery charger until they have reached full capacity. After that, they must go through a cooling down period of 8 hours.
Because of this, lead-acid batteries require one or more well-ventilated rooms. If you have multiple forklifts in your operation, you’ll need space for multiple chargers and an area for the batteries to cool down after fully recharging.
The weight of one battery alone can be significant. If you have dozens of forklifts in operation, you’ll need heavy duty racking that can withstand the weight load of storing all these batteries.
The benefit of lithium-ion batteries is that they do not need to be removed in order to be charged...they can be directly plugged into a nearby charger while remaining in the forklift. They can also be opportunity charged in between shifts, making storage a non-issue.
Along similar lines, because lead-acid batteries require removal from the forklift in order to be charged, you’ll need to invest in the proper equipment that can lift the batteries out of the forklifts several times a day.
Lithium-ion batteries, on the other hand, don’t need to be removed from the forklift to be charged on a daily basis. This means that equipment is only needed to place the battery in the forklift at the beginning of service and at the end of the battery’s lifespan. Therefore, the equipment won’t be subjected to daily wear and tear, and you will need far fewer movers and transporters since they won’t be used nearly as often.
The weight load capacity of the equipment is especially important. If a battery is too heavy for what the equipment can handle, the mover or transporter may tip, causing injury to your workers and damaging the battery.
Labor costs can significantly add up when using lead-acid batteries because they require a more labor-intensive process when a battery must be charged:
● Forklift battery weightForklift operators typically drive to a charging room.
● Trained personnel must remove the battery from the forklift using special handling equipment.
● The lead-acid battery is placed on a rack where it will be charged for approximately 8 hours.
● During this process, one of the personnel may check the electrolyte level to prevent spillover and damage to other batteries.
● Once the battery is charged, it may be kept where it is for another 8 hours to “cool” or be moved to another location if that charging station is needed to charge another battery.
● Personnel will check the electrolyte level before putting the battery back into service.
● Trained personnel will then transfer the battery back to the forklift.
● Directly impacting these labor costs are the average run times for lead-acid batteries. Lead-acid batteries generally last between 5 and 6 hours, which means that the above battery charging process will need to be done at least once for each 8-hour shift that a forklift is in operation.
● Lithium-ion batteries, on the other hand, have a run time between 7 and 8 hours, can remain in the forklift for charging, and simply are plugged into the charger for opportunity charging in between shifts or during worker downtime.
● One multi-shift major equipment manufacturer found it was spending approximately $4,800 every day on lost productivity associated with the removal and re-installation of lead-acid batteries for charging. With 300+ operational days per year, that’s a cost of nearly $1.5 million spent simply on swapping out batteries!
● You can read about their story in our article, Lithium-ion lift truck batteries help food industries save more than half a Two million dollars.
While many fleet managers examine characteristics like run time, battery maintenance, and energy efficiency when choosing a battery, they often don’t realize the significance battery weight plays in their operation.
In conjunction with their weight, lead-acid battery charging requirements play a much bigger role in increased operational costs that many companies don’t consider ahead of purchase.
Because they are the far lighter option, lithium-ion batteries provide several additional benefits over time, from an increase in efficiency to safety enhancements that benefit both the company’s workers and bottom line.
Contact BSLBATT Lithium today for a quote on a new forklift Lithium battery that meets your lifting requirements.
